[c-nsp] Cisco 2620XM memory upgrade

John Neiberger John.Neiberger at efirstbank.com
Mon May 2 18:01:52 EDT 2005


>>>> "Rainer Borromeo" <rain at support.temark.com> 5/2/05 3:10:15 PM >>>
>I've added another 128megs of SDRAM to this router, it shows up at
bootup
>but when I do a show ver it still only shows 128megs of RAM when it
should
>be 256. Am I missing something here? Or doing something wrong. It is
cisco
>approved memory too.

You must have at least ROMMON version 12.2(8r) and IOS version
12.3(11)T to gain access to the extra memory. This information can be
found at:

http://www.cisco.com/en/US/products/hw/routers/ps259/prod_bulletin0900aecd801e3d53.html


I didn't realize there was an IOS and ROMMON restriction until I looked
for it just now.

HTH,
John
--


More information about the cisco-nsp mailing list