[c-nsp] FE experienceing errors and CRCs

[Kim Onnel]

yes they are incrementing.

On 4/29/05, James Sneeringer <james+cisco at vincentsystems.com> wrote:
> On Fri, Apr 29, 2005 at 01:39:53PM +0200, Kim Onnel wrote:
> > They are both Cisco, on the switch i have the command 'speed' but i
> > couldnt find the command to set speed on the RPM-PR(7200)
> 
> If Fa1/1 is a PA-FE-TX card, it only does 100base and does not do duplex
> autonegotiation.  There's no speed to change, and you must force it to
> either half-duplex or full-duplex.  I think it defaults to half.
> 
> The error counts are pretty small compared to the overall packet counts
> (1749 CRC errors versus 16243259 packets, 0.01% errors).  Are the error
> counters steadily incrementing, or have they been stuck on their current
> counts for awhile?
> 
> -James
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>