[c-nsp] Sup720 crash?

Tue May 3 14:06:47 EDT 2005

Has anyone seen this crash 6500/sup720?
Any suggestions?

Kevin,

System Bootstrap, Version 8.1(3)
Copyright (c) 1994-2004 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 131072 Kbytes of main memory

rommon 1 > boot
Loading image, please wait ...

Self decompressing the image :
#################################################
########################################################################
########
########################################################################
########
######################################################################
[OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS (tm) s72033_sp Software (s72033_sp-SPV-M), Version 12.2(17d)SXB1,
RELEASE S
OFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 28-May-04 19:40 by ccai
Image text-base: 0x40020FBC, data-base: 0x40DB0000

00:00:03: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor

System Bootstrap, Version 12.2(17r)S2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2004 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 131072 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image :
#################################################
########################################################################
########
####### [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12.2(17d)SXB1,
RELEASE S
OFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 28-May-04 19:37 by ccai
Image text-base: 0x40020FBC, data-base: 0x41CC0000

cisco WS-C6506 (R7000) processor (revision 3.0) with 112640K/18432K
bytes of mem
ory.
Processor board ID SAL08363EHQ
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 Virtual Ethernet/IEEE 802.3  interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

%Software-forced reload

Unexpected exception, CPU signal 23, PC = 0x402EE6DC

-Traceback= 402EE6DC 402EC5A4 403D5968 403D5994 4046C810 403C37E8
403C3840 40392
AB4 40393850 4034315C 4034084C 40340A98 402F2B2C
$0 : 00000000, AT : 41E60000, v0 : 423A0000, v1 : 41F70000
a0 : 42373CF4, a1 : 0000F100, a2 : 00000000, a3 : 41D00000
t0 : 402F30F0, t1 : 3401F101, t2 : 402F3100, t3 : FFFF00FF
t4 : 402F30F0, t5 : 00001282, t6 : 40000000, t7 : 00000000
s0 : 00000000, s1 : 00000000, s2 : 41D10000, s3 : 43C98890
s4 : 00000040, s5 : 423B0000, s6 : 0000005A, s7 : 43C98890
t8 : 00000000, t9 : 00000004, k0 : 00000000, k1 : 00000000
gp : 41E67520, sp : 43436A30, s8 : 00000000, ra : 402EC5A4
EPC  : 402EE6DC, ErrorEPC : BFC29DE0, SREG     : 3401F103
MDLO : 00000000, MDHI     : 00000000, BadVaddr : 00000000
Cause 00000024 (Code 0x9): Breakpoint exception

Writing crashinfo to bootflash:crashinfo_20050502-105806

=== Flushing messages (10:58:07 UTC Mon May 2 2005) ===

Buffered messages:
Queued messages:
00:00:47: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console
debugging out
put.

00:00:37: curr is 0x0

00:00:37: RP: Currently running ROMMON from S (Gold) region
00:00:47: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due
to exce
ption , resetting [6/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x423a04f4
  PC = 0x402f31a0, SP = 0x41d152f0, RA = 0x402dae54
  Cause Reg = 0x00003020, Status Reg = 0x34018002
rommon 1 > šj
             00:00:48: %SYS-SP-3-LOGGER_FLUSHED: System was paused for
00:00:00
to ensure console debugging output.

00:00:48: %OIR-SP-6-CONSOLE: Changing console ownership to switch
processor

*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x43a7c844
PC = 0x40143858, Cause = 0x5020, Status Reg = 0x34008002
rommon 2 >