[c-nsp] IOS 12.4 and NAT

[Brian Vowell]

I could not get NAT to allow any translations without the enable 
command.  I've been having all sorts of problems with 12.4(1) all day, 
so I downgraded to 12.3(14)T1, and the command shows up there too.

What hardware are you running 12.4(1.2) on?


--b

Denny Reiter wrote:

>On Tue, May 03, 2005 at 11:45:21AM -0700, Brian Vowell wrote:
>  
>
>>Just an FYI for anyone who'll be doing NAT with 12.4:
>>
>>In addition to configuring an interface as either inside or outside, you 
>>also now have to enter the interface command "ip nat enable" on an 
>>interface that you would like to setup NAT.  I'm not sure why that's not 
>>the default, but hopefully this email will prevent others from having to 
>>spend an hour or more going over their NAT configs and wondering why it 
>>doesn't work. 
>>    
>>
>
>I'm running 12.4(1.2) and NAT, and didn't need to enter 'ip nat enable'.
>
>Denny
>
>  
>