[c-nsp] Cisco 1310 WiFi question

William Jackson wjackson at broadband.gi
Wed May 4 08:04:01 EDT 2005


I have 2 1310 WiFi bridges

I have the following setup:

Can anybody see why they wont associate?
I have debug dot11 events on and also dot11 network-map enabled to try and
see if anything tells me why they arent seeing each other.
Supposed to be :


LAN------WiFi Bridge - - - - - - - WiFi Bridge----LAN

Any ideas?
****************************************************************************
*************************
Unit 1:

dot11 vlan-name TEST-VLAN vlan 2
dot11 vlan-name BACKBONE-VLAN vlan 1

dot11 ssid WIFISSID
   vlan 1
   authentication open
   infrastructure-ssid

interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 ssid WIFISSID
 !
 short-slot-time
 cca 75
 concatenation
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0
48.0 54.0
 station-role non-root
 infrastructure-client
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
no ip route-cache
 bridge-group 1
!
interface Dot11Radio0.2
 encapsulation dot1Q 2
 no ip route-cache
 bridge-group 2
!
interface FastEthernet0
 no ip address
 no ip route-cache
 full-duplex
!
interface FastEthernet0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 bridge-group 1
!
interface FastEthernet0.2
 encapsulation dot1Q 2
 no ip route-cache
 bridge-group 2
!
interface BVI1
 ip address 172.20.1.24 255.255.255.0
 no ip route-cache
!

****************************************************************************
*************************
Unit 2

dot11 vlan-name TEST-VLAN vlan 2
dot11 vlan-name BACKBONE-VLAN vlan 1

dot11 ssid WIFISSID
   vlan 1
   authentication open
!
dot11 network-map

interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 ssid WIFISSID
 !
 short-slot-time
 cca 75
 concatenation
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0
48.0 54.0
 channel 2432
 station-role root
!
interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 no cdp enable
 bridge-group 1
!
interface Dot11Radio0.2
 encapsulation dot1Q 2
 no ip route-cache
 no cdp enable
 bridge-group 2
!
interface FastEthernet0
 no ip address
 no ip route-cache
!
interface FastEthernet0.1
 encapsulation dot1Q 1 native
no ip route-cache
 no cdp enable
 bridge-group 1
!
interface FastEthernet0.2
 encapsulation dot1Q 2
 no ip route-cache
 no cdp enable
 bridge-group 2
!
interface BVI1
 ip address 172.20.1.23 255.255.255.0
 no ip route-cache
!

thanks


More information about the cisco-nsp mailing list