[c-nsp] HELP!!!!Aironet 1200 Problem Routing

[Eusebio López]

Hi,
 
Thanks to help me.  
My AP already works correctly, although I even have a small problem with the DHCP, but he is not nothing important.  
 
Regards,

	-----Mensaje original----- 
	De: Kristofer Sigurdsson [mailto:ks at rhi.hi.is] 
	Enviado el: lun 02/05/2005 13:25 
	Para: Eusebio López 
	CC: cisco-nsp at puck.nether.net 
	Asunto: RE: [c-nsp] HELP!!!!Aironet 1200 Problem Routing
	
	

	Hi, 

	Based on your config, I believe one or more of the following 
	is causing your problems: 

	1. Since Fa0/24 is the only trunk port on your switch, where does 
	   vlan 2 get it's L3 connectivity? 

	2. I think I'm right in assuming you are using two IP networks, 
	   101.0.0.0/24 and 10.254.254.0/24.  Both of these network's gateway 
	   addresses are configured at the same L3 interface on your gateway. 

	What you have to do is: 

	1. Configure a trunk between your switch and your router. 
	2. Configure two L3 interfaces on your router, one for each VLAN.