[c-nsp] 7206 Restarting

Niels Bakker niels=cisco-nsp at bakker.net
Sat May 7 15:59:15 EDT 2005


>>On Fri, 6 May 2005, Dave Weis wrote:
>>>The output interpreter output is below. Should I just upgrade to a
>>>newer ios? It's routing between a couple ethernets and a PA-A3-OC3MM 
>>>terminating pppoa ADSL sessions.

>Justin M. Streiner wrote:
>>That would be a question best fielded by Cisco's TAC and the tools on 
>>their support site.  Upgrading to a new IOS for the sake of trying it 
>>out is usually not a good idea on a production router.

* jmaimon at ttec.com (Joe Maimon) [Fri 06 May 2005, 21:02 CEST]:
>Its hard to imagine he would be much worse off running 12.3 mainline 
>latest. But by all means, send the crashinfo in to TAC.

The router under discussion is a:

| cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.

... which may not boot images past 12.2(25)S, maybe including recent 12.3. 
It was discussed a few months ago on this list.


	-- Niels.

-- 


More information about the cisco-nsp mailing list