[c-nsp] second supervisor engine on 7609

Tue May 10 06:14:02 EDT 2005

Hi,
I'm encountered a problem with activation of second supervisor engine on
our 7609, it looks like secondary supervisor engine is booting well
after hot insertion to chassis but it's not recognized by system, I've
got 'Supervisor-Other' by 'sh module' command, see below. 
Could somebody help me with it? 
I don't want to reboot router, it will disconnects many users of ours.

Thanks, Alexc

sh module output:
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  1    2  Catalyst 6000 supervisor 2 (Active)    WS-X6K-S2U-MSFC2   SAD054600JF
  2    0  Supervisor-Other                       Unknown            Unknown
  3    0  2 port adapter FlexWAN                 WS-X6182-2PA       SAD044207FV
  4    8  8 port 1000mb ethernet                 WS-X6408-GBIC      SAD04130F1Y

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  1  0001.6415.8aa6 to 0001.6415.8aa7   3.2   6.1(4)       12.1(20)E2   Ok
  2  0000.0000.0000 to 0000.0000.0000   0.0   Unknown      Unknown      Unknown
  3  0003.32b9.151a to 0003.32b9.1559   1.3   12.1(20)E2   12.1(20)E2   Ok
  4  00d0.d337.cf48 to 00d0.d337.cf4f   2.4   5.1(1)CSX    8.2(0.58)TFW Ok

Mod Sub-Module                  Model           Serial           Hw     Status 
--- --------------------------- --------------- --------------- ------- -------
  1 Policy Feature Card 2       WS-F6K-PFC2     SAD054506NB      2.0    Ok
  1 Cat6k MSFC 2 daughterboard  WS-F6K-MSFC2    SAD054504DY      1.2    Ok
  2 Policy Feature Card 2       WS-F6K-PFC2     SAL082292PH      3.4    Other

Mod Online Diag Status 
--- -------------------
  1 Pass
  2 Unknown
  3 Not Applicable
  4 Pass

sh version output:
Cisco Internetwork Operating System Software 
IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 30-Jan-04 22:36 by pwade
Image text-base: 0x40008F90, data-base: 0x41850000

ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E2, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)

rtr76 uptime is 8 weeks, 1 day, 8 hours, 16 minutes
Time since rtr76 switched to active is 8 weeks, 1 day, 8 hours, 17
minutes
System returned to ROM by power-on (SP by power-on)
System restarted at 01:47:07 UTC Mon Mar 14 2005
System image file is "slot0:c6sup22-psv-mz.121-20.E2.bin"

cisco OSR-7609 (R7000) processor (revision 3.1) with 458752K/65536K
bytes of memory.
Processor board ID TBA05450364
R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
Cache
Last reset from power-on
X.25 software, Version 3.0.0.
Bridging software.
1 FlexWAN controller (2 ATM).
62 Virtual Ethernet/IEEE 802.3  interface(s)
10 Gigabit Ethernet/IEEE 802.3 interface(s)
2 ATM network interface(s)
381K bytes of non-volatile configuration memory.

16384K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x102

output on console of second supervisor engine:
Autoboot executing command: "boot slot0:"                                       

Self decompressing the image : ###..### [OK]                       

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is                            
subject to restrictions as set forth in subparagraph                            
(c) of the Commercial Computer Software - Restricted                            
Rights clause at FAR sec. 52.227-19 and subparagraph                            
(c) (1) (ii) of the Rights in Technical Data and Computer                       
Software clause at DFARS sec. 252.227-7013.                                     

           cisco Systems, Inc.                                                  
           170 West Tasman Drive                                                
           San Jose, California 95134-1706

Cisco Internetwork Operating System Software                                    
IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 13.1(20)E2, EARLY DEPLOYM
ENT RELEASE SOFTWARE (fc1)                                                      
TAC Support: http://www.cisco.com/tac                                           
Copyright (c) 1986-2004 by cisco Systems, Inc.                                  
Compiled Fri 30-Jan-04 23:13 by pwade                                           
Image text-base: 0x40020F90, data-base: 0x4097A000                              

00:00:02: %PFREDUN-6-STANDBY: Initializing as STANDBY processor                 
00:00:03: %C6K_PLATFORM-5-MISMATCH: 'sup-bootflash' device programming algorithm
mismatch detected on SP (module: 2), formatting is recommended.                
00:00:08: %OIR-SP-STDBY-6-CONSOLE: Changing console ownership to route processor