[c-nsp] NM-16AM-V2 not detecting

[Gangasagar Amula]

Dear All,

After Insersion of NM-16AM-V2 card in our router...we are not able to detect it...


Pls suggest....
What can be reason for the same.....


------------------ show version ------------------

Cisco Internetwork Operating System Software 
IOS (tm) 3600 Software (C3660-IK9S-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 10-May-02 19:35 by pwade
Image text-base: 0x600089C0, data-base: 0x61380000

ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

MUMBAI-2-CO uptime is 1 week, 6 days, 21 hours, 2 minutes
System returned to ROM by power-on
System restarted at 20:59:12 IST Thu Mar 24 2005
System image file is "flash:c3660-ik9s-mz.122-7c.bin"

cisco 3660 (R527x) processor (revision 1.0) with 58368K/7168K bytes of memory.
Processor board ID 
R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Basic Rate ISDN software, Version 1.1.


3660 Chassis type: ENTERPRISE
2 FastEthernet/IEEE 802.3 interface(s)
4 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
4 ISDN Basic Rate interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102



------------------------------------------------------------

Regards,
Sagar.