[c-nsp] second supervisor engine on 7609

Wed May 11 07:34:14 EDT 2005

Hi,
Thanks to all, it was memory fault on secondary MFC2. I put the original
256Mb DIMM and it's started to work. May I ask another questions?

1. what the difference between WS-X6K-SUP2-2GE and WS-X6K-S2U-MSFC2?
2. does WS-X6K-SUP2-2GE support 512Mb on MFC2?

Thank you, Alexc

On Tue, 2005-05-10 at 04:08 -0700, Ian Cox wrote:
> Does the 2nd Supervisor go any further than the output provided 
> below. The output below just shows the SP side booting of the 2nd 
> supervisor. The RP side also has to boot up, does it stop at a rommon 
> prompt? if it does change the configuration register to 0x2 and type 
> reset to get the RP to boot on the backup. -> You may want to get the 
> second supervisor booting correctly in another chassis, and when it 
> is ok, put it in this chassis.
> 
> 
> Ian
> 
> 
> At 01:14 PM 5/10/2005 +0300, Vects wrote:
> >Hi,
> >I'm encountered a problem with activation of second supervisor engine on
> >our 7609, it looks like secondary supervisor engine is booting well
> >after hot insertion to chassis but it's not recognized by system, I've
> >got 'Supervisor-Other' by 'sh module' command, see below.
> >Could somebody help me with it?
> >I don't want to reboot router, it will disconnects many users of ours.
> >
> >Thanks, Alexc
> >
> >sh module output:
> >Mod Ports Card Type                              Model              Serial No.
> >--- ----- -------------------------------------- ------------------ 
> >-----------
> >   1    2  Catalyst 6000 supervisor 2 
> > (Active)    WS-X6K-S2U-MSFC2   SAD054600JF
> >   2    0  Supervisor-Other                       Unknown            Unknown
> >   3    0  2 port adapter 
> > FlexWAN                 WS-X6182-2PA       SAD044207FV
> >   4    8  8 port 1000mb 
> > ethernet                 WS-X6408-GBIC      SAD04130F1Y
> >
> >Mod MAC addresses                       Hw    Fw           Sw           Status
> >--- ---------------------------------- ------ ------------ 
> >------------ -------
> >   1  0001.6415.8aa6 to 0001.6415.8aa7   3.2   6.1(4)       12.1(20)E2   Ok
> >   2  0000.0000.0000 to 
> > 0000.0000.0000   0.0   Unknown      Unknown      Unknown
> >   3  0003.32b9.151a to 0003.32b9.1559   1.3   12.1(20)E2   12.1(20)E2   Ok
> >   4  00d0.d337.cf48 to 00d0.d337.cf4f   2.4   5.1(1)CSX    8.2(0.58)TFW Ok
> >
> >Mod 
> >Sub-Module                  Model           Serial           Hw     Status
> >--- --------------------------- --------------- --------------- 
> >------- -------
> >   1 Policy Feature Card 2       WS-F6K-PFC2     SAD054506NB      2.0    Ok
> >   1 Cat6k MSFC 2 daughterboard  WS-F6K-MSFC2    SAD054504DY      1.2    Ok
> >   2 Policy Feature Card 2       WS-F6K-PFC2     SAL082292PH      3.4    Other
> >
> >Mod Online Diag Status
> >--- -------------------
> >   1 Pass
> >   2 Unknown
> >   3 Not Applicable
> >   4 Pass
> >
> >sh version output:
> >Cisco Internetwork Operating System Software
> >IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E2, EARLY
> >DEPLOYMENT RELEASE SOFTWARE (fc1)
> >TAC Support: http://www.cisco.com/tac
> >Copyright (c) 1986-2004 by cisco Systems, Inc.
> >Compiled Fri 30-Jan-04 22:36 by pwade
> >Image text-base: 0x40008F90, data-base: 0x41850000
> >
> >ROM: System Bootstrap, Version 12.1(4r)E, RELEASE SOFTWARE (fc1)
> >BOOTLDR: c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.1(20)E2, EARLY
> >DEPLOYMENT RELEASE SOFTWARE (fc1)
> >
> >rtr76 uptime is 8 weeks, 1 day, 8 hours, 16 minutes
> >Time since rtr76 switched to active is 8 weeks, 1 day, 8 hours, 17
> >minutes
> >System returned to ROM by power-on (SP by power-on)
> >System restarted at 01:47:07 UTC Mon Mar 14 2005
> >System image file is "slot0:c6sup22-psv-mz.121-20.E2.bin"
> >
> >cisco OSR-7609 (R7000) processor (revision 3.1) with 458752K/65536K
> >bytes of memory.
> >Processor board ID TBA05450364
> >R7000 CPU at 300Mhz, Implementation 39, Rev 2.1, 256KB L2, 1024KB L3
> >Cache
> >Last reset from power-on
> >X.25 software, Version 3.0.0.
> >Bridging software.
> >1 FlexWAN controller (2 ATM).
> >62 Virtual Ethernet/IEEE 802.3  interface(s)
> >10 Gigabit Ethernet/IEEE 802.3 interface(s)
> >2 ATM network interface(s)
> >381K bytes of non-volatile configuration memory.
> >
> >16384K bytes of Flash internal SIMM (Sector size 512K).
> >Configuration register is 0x102
> >
> >
> >output on console of second supervisor engine:
> >Autoboot executing command: "boot 
> >slot0:"
> > 
> >
> >Self decompressing the image : ###..### [OK]
> > 
> >
> >               Restricted Rights Legend
> > 
> >
> >Use, duplication, or disclosure by the Government 
> >is
> >subject to restrictions as set forth in 
> >subparagraph
> >(c) of the Commercial Computer Software - 
> >Restricted
> >Rights clause at FAR sec. 52.227-19 and 
> >subparagraph
> >(c) (1) (ii) of the Rights in Technical Data and 
> >Computer
> >Software clause at DFARS sec. 
> >252.227-7013.
> > 
> >
> >            cisco Systems, 
> > Inc.
> >            170 West Tasman 
> > Drive
> >            San Jose, California 95134-1706
> >
> > 
> >
> >Cisco Internetwork Operating System 
> >Software
> >IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 13.1(20)E2, 
> >EARLY DEPLOYM
> >ENT RELEASE SOFTWARE 
> >(fc1)
> >TAC Support: 
> >http://www.cisco.com/tac
> >Copyright (c) 1986-2004 by cisco Systems, 
> >Inc.
> >Compiled Fri 30-Jan-04 23:13 by 
> >pwade
> >Image text-base: 0x40020F90, data-base: 
> >0x4097A000
> > 
> >
> > 
> >
> >00:00:02: %PFREDUN-6-STANDBY: Initializing as STANDBY 
> >processor
> >00:00:03: %C6K_PLATFORM-5-MISMATCH: 'sup-bootflash' device 
> >programming algorithm
> >mismatch detected on SP (module: 2), formatting is 
> >recommended.
> >00:00:08: %OIR-SP-STDBY-6-CONSOLE: Changing console ownership to 
> >route processor
> >
> >
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/