[c-nsp] ERSPAN support on sup720 w/PFC3BXL

[Aurelie Fonteny]

This restriction only applies to the WS-SUP720-BASE, not to the 
WS-SUP720-3B or WS-SUP720-3BXL so you should be good to go.
Aurelie

>According to the 12.2SX configuration guide for SPAN and friends, ERSPAN
>requires that I run 12.2(18)SXE, and have hardware rev 3.2 or higher on
>my sup720s.  The config guide says to run this command:
>
>  Router# show module version | include WS-SUP720-BASE 
>     7    2  WS-SUP720-BASE     SAD075301SZ Hw :3.2
>
>I've got several sup720/PFC3BXLs, and they don't report a WS-SUP720-BASE.  
>They report as follows:
>
>dc-g#sh mod vers
>Mod Port Model              Serial #    Versions
>--- ---- ------------------ ----------- --------------------------------------
> 1    2  WS-SUP720-3B       SAD084308KD Hw : 4.1
>                                        Fw : 8.1(3)
>                                        Sw : 12.2(18)SXD3
>                                        Sw1: 8.4(0.61)RCC4 
>         WS-SUP720          SAD084900S1 Hw : 2.2
>                                        Fw : 12.2(17r)S2
>                                        Sw : 12.2(18)SXD3
>         WS-F6K-PFC3BXL     SAD08200C9A Hw : 1.3
>
>I'm guessing that I should be looking at the hardware rev on WS-SUP720-3B 
>above (which is 4.1), in which case I'm good to go (modulo the IOS upgrade).
>
>Can someone confirm?
>
>thanks,
>mb
>---
>Mark Boolootian
>UC Santa Cruz
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>  
>