[c-nsp] ERSPAN support on sup720 w/PFC3BXL

[Aurelie Fonteny]

Mark Boolootian wrote:

>>This restriction only applies to the WS-SUP720-BASE, not to the 
>>WS-SUP720-3B or WS-SUP720-3BXL so you should be good to go.
>>    
>>
>
>Thanks very much.  Perhaps you could help with one puzzling aspect of
>the output.  My 'show mod vers' reports my sup720 as follows:
>
>  
>
>>--------------------------------------
>>1    2  WS-SUP720-3B       SAD084308KD Hw : 4.1
>>                                      Fw : 8.1(3)
>>                                      Sw : 12.2(18)SXD3
>>                                      Sw1: 8.4(0.61)RCC4 
>>       WS-SUP720          SAD084900S1 Hw : 2.2
>>                                      Fw : 12.2(17r)S2
>>                                      Sw : 12.2(18)SXD3
>>       WS-F6K-PFC3BXL     SAD08200C9A Hw : 1.3
>>    
>>
>
>
>Hank Nussbacher sees something slightly different on his system:
>
>
>  
>
>>7    2  WS-SUP720-3BXL     SAD090502PG Hw : 4.1
>>                                       Fw : 8.1(3)
>>                                       Sw : 12.2(18)SXD4
>>                                       Sw1: 8.4(0.61)RCC6
>>        WS-SUP720          SAD09030DM8 Hw : 2.2
>>                                       Fw : 12.2(17r)S2
>>                                       Sw : 12.2(18)SXD4
>>        WS-F6K-PFC3BXL     SAD09060A8J Hw : 1.4
>>    
>>
>
>Can you tell me why he reports WS-SUP720-3BXL while I show WS-SUP720-3B?
>Is this just a software issue?
>  
>

WS-SUP720-BASE, WS-SUP720-3B, and WS-SUP720-3BXL are the baseboard names: if you originally ordered a Sup720 with a PFC3a, the baseboard should show up as WS-SUP720-BASE. If you originally ordered a Sup720 with PFC3B, the baseboard should show up as WS-SUP720-3B. If you originally ordered a Sup720 with a PFC3BXL, the baseboard should show up as WS-SUP720-3BXL.
WS-SUP720 is the MSFC3.
WS-F6K-PFC3A, WS-F6K-PFC3B, and WS-F6K-PFC3BXL are the PFC3 versions.

Aurelie

>thanks,
>mb
>
>  
>