[c-nsp] need help on switch configuration

[Jim McBurnett]

OR...
You could manually configure vlan trunking 
Here is an example


switchport trunk encapsulation dot1q 
switchport mode trunk 
switchport nonegotiate
switchport trunk native vlan 100
switchport trunk allowed vlan add 110 

J

-----Original Message-----
From: Jeff Chan [mailto:cisco-nsp at jeffchan.com] 
Sent: Saturday, May 14, 2005 12:26 AM
To: cisco-nsp
Subject: Re: [c-nsp] need help on switch configuration

On Friday, May 13, 2005, 9:09:08 PM, snort bsd wrote:
> I have two switches and they are connected via crossover cable. now i 
> have two vlans (100 and 110) configured and one works fine. but 
> another just doesn't work, meaning that it just doesn't pass trafifc. 
> this vlan is 192168.8.0/27; the servers, the router interface 
> (gateway) just don't talk to each other. here is the configure:

I believe you need to set up a VTP server and database:

  http://www.ciscopress.com/articles/article.asp?p=29803&seqNum=4

Else the trunk doesn't know what to... trunk... ;-)

Jeff C.
--
Jeff Chan
mailto:cisco-nsp at jeffchan.com
http://www.supranet.net/

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/