[c-nsp] policy based

[Erdem Sener]

Hi,

 How the acl's look like ? It quite makes sense once there's a match
the router doesn't check the acl again.

 You could try using the acl's in two different route-map instances,
I'm not sure if this will work, though.

 Cheers,
 Erdem

On 5/16/05, mohieddeen yousef <mohieddeen at hotmail.com> wrote:
> Hi there,
> Actually I'm trying to mach two access lists in the policy based routing at
> the same time
> 
> route-map dial3 permit 10
> match ip address accl1 accl2
> set ip next-hop 10.0.0.1
> 
> route-map dial3 permit 20
> set ip next-hop 10.0.0.2
> 
> what I got that it maches the first accl1 and ignored accl2
> 
> Any idea how to do anding in accesslists
> thanks
> Mohie
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 

-erdem