[c-nsp] Pix can't ping PC

[Voll, Scott]

Update. Loaded SP2 on the XP box and everything is working.  Thank you
M$...... NOT.

Scott

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, May 17, 2005 12:51 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Pix can't ping PC

I just installed a Pix 506 at a remote site.  

The Pix inside address is 192.168.1.19 and there are two routers (.17 &
.18).  Then there is a Windows XP box.  The PC can ping both routers but
not the Pix.  The Pix can ping both routers but not the PC.

All devices are in the 192.168.1.0/24 subnet.  All other PC's are
working.  

Any ideas?  

XP firewall is off.  Changed IPs with same outcome.  Changed ports on
the switch and had the same outcome also.  Rebooted and no help either.

All comments welcome, except Bashing, as I have NO control over what the
end customer uses for networking gear or OSs.

TIA

Scott


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/