[c-nsp] 3620 boot issue - no rommon

[Loc Pham]

   Hello, try this one 
http://www.cisco.com/warp/public/130/xmodem_generic.html

 I recover my 3661 box from scratch using the above ...
 It can even boot directly to DRAM and load a small image there...
 HTH, 
 lP.


> Hello,
> I've got a Cisco 3620 here on which I needed to load a new image &
> config. So I erased the config with a "write erase" & removed the IOS
> file from the onboard flash. After that I issued a reload on the unit,
> without loading a new IOS image on the internal flash (I had one on a
> flash card which I was hoping to boot from rommon).
> 
> After the reload the unit didn't come back up again - nothing on the
> console either. It just keeps blinking it's system led. To make sure the
> console was set up correctly I did a reset of the console speed with the
> onboard jumper, but still nothing. At 9600 baud the console remains
> dead, nor does it answer any break sequences sent.
> 
> Any clues what I can still try? I have some spare routers if need be
> (3660 & some 2600's).
> 
> Thanks.
> 
> // nick
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/