[c-nsp] Saving config

[Ram S]

Hi,
I have a 7200 router with NPE-400 in it. I am trying 
to store a large config in startup-config so that the
router boots up with this config. But I am unable to
save the config. Any idea what I should do ? Logs are
below :-

Logs:
-----
7200-ATM#dir nvram:
Directory of nvram:/

  124  -rw-           5                    <no date> 
startup-config
  125  ----           5                    <no date> 
private-config
  126  -rw-           5                    <no date> 
underlying-config

129016 bytes total (127930 bytes free)
7200-ATM#
7200-ATM#copy start
7200-ATM#copy runn           
7200-ATM#copy running-config start
7200-ATM#copy running-config startup-config
Destination filename [startup-config]? 
Building configuration...

% Warning: Saving this config to nvram may corrupt any
network management or security files stored at the end
of nvram.
Continue? [no]: yes
% Configuration buffer full, can't add command:
interface ATM6/0.1408
%Aborting Save. Compress the config, Save it to flash
or Free up space on device
*Feb 13 12:12:14.639: %SYS-4-CONFIG_NV_OVERRUN: Non
config data present at the end of nvram is
corrupted[OK]
7200-ATM#
7200-ATM#
7200-ATM#dir 
*Feb 13 12:12:24.859: %SYS-7-NV_BLOCK_INIT:
Initialized the geometry of nvramnvram
7200-ATM#dir nvram:
Directory of nvram:/

  124  -rw-           5                    <no date> 
startup-config
  125  ----           5                    <no date> 
private-config
  126  -rw-           5                    <no date> 
underlying-config

129016 bytes total (128954 bytes free)
7200-ATM#


Thanks,
Ram




		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Find what you need with new enhanced search. 
http://info.mail.yahoo.com/mail_250