[c-nsp] Limiting Traffic

[Sukumar Subburayan]

Yes, it is possible.

One way to do that is:

1. Create a aggregate policer
2. Define a class-map (in your case it would be 'match-all')
3. Create a service-policy and attach the class-map to that service-policy
4. attach the aggregate policer to your service-policy
5. apply the service policy to the vlan interface

You can refer to the 'Configuring QOS' section for the Cat4k:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_25/conf/qos.htm#wp1273408

sukumar





On Fri, 27 May 2005, Craig Gauss wrote:

> We are looking at adding a public VLAN on our wireless network for
> patients to use for Internet browsing. Is it possible to limit the total
> bandwidth for that VLAN on our 4507?
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>