[c-nsp] Changing OSPF timers!Possible to have different timer s in different areas (interfaces) on an ABR.

[Tantsura, Jeff]

Yes, you can.

--
Jeff Tantsura  CCIE# 11416
Senior IP Network Engineer


-----Original Message-----
From: Símon H. Wiium [mailto:simon at ipf.is] 
Sent: 03 November 2005 12:27
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Changing OSPF timers!Possible to have different timers in
different areas (interfaces) on an ABR.

 

Hello every one.

 

I have 2 ABRS that reside in area 0, 1 and 2. These ABRs are running OSPF
and BGP. They are supposed to peer with 2 non Cisco routers in Area 2 and
route voice traffic.

 

 

I have configured 2 subinterfaces p2p on each ABR against 2 non cisco
routers in area 2.

My question is, can I modify the the OSPF hello/dead interval timers from
their default for just Area 2 and not the rest of the network?

 

Thanks

Simon

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/