[c-nsp] OSPF adj cycling FULL to LOADING?

[Peter Gutierrez]

Ziti Bake wrote:
> I've been asked for more detail on the routers and
> configs.  
> Here are the relative bits of router config for each
> end:
[snip]>

>>
>>interface GigabitEthernet1/1
>> description Location B, remoteLAN
>> ip address 192.168.1.2 255.255.255.0
>> ip route-cache flow
>> ip ospf authentication-key amazingcontraption
>> load-interval 30
>> no cdp enable
>>
>>interface Vlan123
>> description Ethernet MAN to Location A
>> ip address 192.168.1.250 255.255.255.252

I don't get how this router can have these two interfaces with
conflicting subnet masks: it shouldn't allow it to be configured. Are
you sure the gi1/1 mask isn't 255.255.255.128?

PeterG