[c-nsp] MPLS for Sup720-3BXL / IOS feature set

[Kristofer Sigurdsson]

Ahh, the change from "IP" to "IP Services"?  Thanks for the info, Rich.

According to these release notes, MPLS is not supported in the IP 
feature set, but according to the feature navigator, they are.

Can anyone confirm or deny MPLS support in 12.2(18)SXD6 on Sup720-3BXL,
using the IP feature set?

On Thu, 2005-11-10 at 23:05 +1100, Richard Gallagher wrote:
> The feature sets for 12.2SX changed in SXE with the new ios packaging. 
> You can compare the 2 different feature set schemes in the release notes:
> 
> http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_note09186a00801c8339.html#wp1840752
> 
> Rich
> 
> Kristofer Sigurdsson wrote:
> > Hi,
> > 
> > I've been looking into doing MPLS on a 7600/Sup720-3BXL and
> > wondering which IOS I should use.  According to the feature
> > navigator, IOS 12.2(18)SXD supports MPLS in the basic IP
> > feature set, but 12.2(18)SXF ("IP Services") does not.
> > Now, I was under the impression that SXF was simply a later
> > release of SXD...so they should support the same features?
> > 
> > Is anyone running MPLS on this hardware using the normal "IP"
> > feature set in 12.2SXD?  Any advice on how to proceed in this?
> > Is MPLS support in the basic feature set on SXD something that
> > will be removed from later releases?
> > 
> > Thanks in advance,
> > -Kristofer
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/