[c-nsp] 2611XM problem
Ganbold
ganbold at micom.mng.net
Tue Nov 15 01:37:17 EST 2005
Hi,
I upgraded IOS to 12.2.31. But still I can't issue wr command.
Router(config-if)#ip address 192.168.0.239 255.255.255.0
Router(config-if)#no shut
Router(config-if)#end
Router#
00:01:50: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:01:50: %SYS-5-CONFIG_I: Configured from console by console
00:01:51: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,
chanp
Router#wr
Unexpected exception to CPUvector 1200, PC = 81118034
-Traceback= 81118034 80454788 80454EB4 803F83C0 8032F378 8032F2EC 8035DBA8
8035C
Writing crashinfo to flash:crashinfo_19930301-000156
Queued messages:
*** System received a SegV exception ***
signal= 0xb, code= 0x1200, context= 0x81a771ac
PC = 0x81118034, Vector = 0x1200, SP = 0x81e3b300
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by ci
I don't know yet how to solve this issue.
thanks,
Ganbold
At 08:48 AM 11/15/2005, you wrote:
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>Ganbold wrote:
> > Hi,
> >
> > I have a problem with Cisco 2611XM. When I try to issue write memory
> > command system says following error
> > and reloads.
> > Is this issue related with physical memory? How can I solve this problem?
> > I appreciate if somebody advise me regarding this issue.
> >
>
>No, this is likely a software bug.
>
>
> > -----------------------------------------------------------------
> > Mar 1 08:07:30.534 GMT: %SYS-5-CONFIG_I: Configured from console by
> consolewri
> > te memory
> >
> > Unexpected exception to CPUvector 1200, PC = 81117480
> > -Traceback= 81117480 804542DC 80454A08 803F7E60 8032EFE4 8032EF58 8035D78C
> > 80351
> > 4EC 80360794 803F201C
> >
> > Writing crashinfo to flash:crashinfo_19930301-000744
> > Queued messages:
> > *** System received a SegV exception ***
> > signal= 0xb, code= 0x1200, context= 0x81a735b4
> > PC = 0x81117480, Vector = 0x1200, SP = 0x81e37548
> >
> > System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
> > Copyright (c) 2003 by cisco Systems, Inc.
> > C2600 platform with 131072 Kbytes of main memory
> > -----------------------------------------------------------------
> >
>
>This is the version of the system bootstrap and not the version of the
>image you are running. There have been a number of bugs that exhibit this
>behavior, but it would help to know what version you are actually running
>to determine if you are hitting one of them and if it is fixed.
>
>At this point, you should probably open a case to research the issue.
>
>- --
>=========
>bep
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.4.0 (MingW32)
>
>iD8DBQFDeTB5E1XcgMgrtyYRAjLoAKCBW2BCozWYbcASFdRyna3t4Dh4sACfXUTA
>Gr29RjCYqQUyAov9FAVZuRw=
>=+fx8
>-----END PGP SIGNATURE-----
More information about the cisco-nsp
mailing list