[c-nsp] vlan.dat

[Marko Milivojevic]

	If you configure the switch to operate VTP in transparent mode (vtp mode 
transparent), VLAN data will be saved with the config. If you are relying on 
VTP to create VLAN's, forget about this :-(.

Marko.

jan gregor wrote:
> Hello,
> 
> is there any way to force 2950 switch to save vlan information to
> startup config? This is for backup / grep purposes. The vlan is visible
> via "show vlan", file vlan.dat exists, but there is no vlan in 
> "show startup-config". Software image is c2950-i6q4l2-mz.121-22.EA4.bin.
> Many thanks for any pointers.
> 
> Best regards,
> 
> Jan Gregor
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>