[c-nsp] VWIC-2MFT-E1, Serial Up/Down problems in Cisco2611XM

Ganbold ganbold at micom.mng.net
Thu Nov 24 03:37:48 EST 2005


Hi,

I have problem with VWIC-2MFT-E1 and one of the Serial in Cisco2611XM.
The IOS version is: 12.3.16a
Serial and E1 interface goes up and down. What the reason could be?

thanks,

Ganbold

Following is the log and serial interface status:

2d00h: %E1T1_MODULE-3-LINEFLAP: Interface Serial0/3:0 receiving 
excessive errors

2d00h: %E1T1_MODULE-3-LINEFLAP: Interface Serial0/2:0 receiving 
excessive error]

Serial0/0 is up, line protocol is up
   Hardware is PowerQUICC Serial
   Internet address is x.x.x.x/30
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
      reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation HDLC, loopback not set
   Keepalive set (10 sec)
   Last input never, output never, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops)
      Conversations  0/2/256 (active/max active/max total)
      Reserved Conversations 0/0 (allocated/max allocated)
      Available Bandwidth 1158 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
      0 packets input, 0 bytes, 0 no buffer
      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
      34 packets output, 1526 bytes, 0 underruns
      0 output errors, 0 collisions, 23 interface resets
      0 output buffer failures, 0 output buffers swapped out
  --More--
  --More--
2d00h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, 
chan     363 s
      DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

Router#sh int ser0/0
Serial0/0 is up, line protocol is down
   Hardware is PowerQUICC Serial
   Internet address is x.x.x.x/30
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
      reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation HDLC, loopback not set
   Last input never, output never, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 1/1000/64/0 (size/max total/threshold/drops)
      Conversations  1/2/256 (active/max active/max total)
      Reserved Conversations 0/0 (allocated/max allocated)
      Available Bandwidth 1158 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
      0 packets input, 0 bytes, 0 no buffer
      Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
      0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
      38 packets output, 1937 bytes, 0 underruns
      0 output errors, 0 collisions, 25 interface resets
      0 output buffer failures, 0 output buffers swapped out
      363 carrier transitions
      DCD=up  DSR=up  DTR=up  RTS=up  CTS=up



More information about the cisco-nsp mailing list