[c-nsp] Port-Channel MTU - NPE-G1

[Ben White]

Hi,

I've got a port-channel setup, using 2 Gigabit ports of an
NPE-G1/7206VXR with IOS 12.3(13a) at the moment.

I can set the MTU individually on the member links, but when I attempt
it on the port-channel interface, it complains with this:

% At least one member of the channel group 1 is not a 2FE port adapter

Is there any way to get a jumbo frame working with the port-channel?

Thanks,

Ben