[c-nsp] rate-limit input on atm subinterfaces?

[Jason Philbrook]

This is what we do for ratelimiting:

interface ATM1/0.2321 point-to-point
 description name location dslam phone
 ip unnumbered BVI2
 rate-limit input 384000 8000 8000 conform-action transmit exceed-action drop
 rate-limit output 384000 8000 8000 conform-action transmit exceed-action drop
 atm route-bridged ip
 pvc 2/321 
 !

An IP is also routed to the subinterface later on in the config.

On Mon, Nov 28, 2005 at 02:49:18PM -0800, Dan Hollis wrote:
> Is rate-limit input supposed to work on atm subinterfaces?
> 
> interface ATM1/0.357 point-to-point
>   rate-limit input 256000 32000 96000 conform-action transmit exceed-action drop
>   pvc 1/357
>    ubr 1544
>    encapsulation aal5mux ppp Virtual-Template1
>   !
> 
> seems to have no effect, the pvc is still able to do eg 900kbit input.
> 
> -Dan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
/*
Jason Philbrook   |   Midcoast Internet Solutions - Internet Access,
    KB1IOJ        |  Hosting, and TCP-IP Networks for Midcoast Maine
 http://f64.nu/   |             http://www.midcoast.com/
*/