[c-nsp] Cisco 7609 line card CPU

[Kim Onnel]

How about SNMP ? and RP and SP

On 11/30/05, Hank Nussbacher <hank at efes.iucc.ac.il> wrote:
>
> At 07:52 AM 30-11-05 +0200, Palis Michael wrote:
> >Hello all
> >
> >
> >
> >Is their a way to get the C7609 line card CPU statistics? I am looking
> for
> >the commands and the mibs
>
> If the linecard is a Flexwan then:
>
> gp1#ipc-cons 1
> Entering CONSOLE for slot 1
> Type "^C^C^C" to end this session
>
>
> FlexWAN-ENH-1/0>sho proc
> CPU utilization for five seconds: 0%/0%; one minute: 0%; five minutes: 0%
>
> -Hank
>
>
> >
> >
> >
> >
> >Regards
> >
> >
> >
> >
> >
> >
> >
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >https://puck.nether.net/mailman/listinfo/cisco-nsp
> >archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >  +++++++++++++++++++++++++++++++++++++++++++
> >  This Mail Was Scanned By Mail-seCure System
> >  at the Tel-Aviv University CC.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>