[c-nsp] route maps and bgp

[A.Rahman Isnaini R Sutan]

below config impact will be

- allow all prefix
- allow all ip (private, public,..)

To transit on your backbone that might be not needed or even harm your
network & them.
Do you implement BW shapping for your neighbor ?

A. Rahman Isnaini R Sutan

----- Original Message -----
From: "Chad Whitten" <cwhitten at nexband.com>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 04, 2005 10:05 AM
Subject: [c-nsp] route maps and bgp


> my provider just switched me from a cisco router to a juniper router and
my
> bgp session is all funky.  they are telling me i need route maps to filter
> the routes (im advertising my other neighbors routes to them).  im trying
to
> advertise two networks out to each neighbor.  my config was basically
>
> router bgp AS#
> network a.b.c.d/24
> network e.f.g.h/20
> neighbor w.x.y.z remote-as ####
> neighbor w.x.y.z version 4
> neighbor 1.2.3.4 remote-as ####
> neighbor 1.2.3.4 version 4
>
> apparently with this simple config, im a transit now - and it is hitting
my
> network hard.
>
> could anyone help me out?
> --
> Chad Whitten
> Chief Operations Officer
> neXband Communications
> cwhitten at nexband.com - Email
> chadwick at jabber.nexband.com - Jabber
> 601-988-0101 - Phone
> 601-988-0015 - Fax
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>