[c-nsp] SNMP a 2950 Trunk port?

[Skeeve Stevens]

It's configured... It was just only seeing a GigE and a VLAN... No FE's....
Odd. 



_______________________________________________________
Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
Si vis pacem, para bellum


-----Original Message-----
From: David J. Hughes [mailto:bambi at Hughes.com.au] 
Sent: Wednesday, 5 October 2005 7:01 AM
To: skeeve at skeeve.org
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] SNMP a 2950 Trunk port?


On 05/10/2005, at 1:00 AM, Skeeve Stevens wrote:

>
> Anyone know why I wouldn't be able to SNMP the statistics of a port on 
> a 2950 in

Sure, we complain about SNMP counter problems in IOS often but this
certainly isn't one.  Sounds like you haven't configured SNMP on the switch
Skeeve.



David
...


========================================================================
 iBurst Wireless Broadband from $34.95/month   www.platformnetworks.net
 Forward undetected SPAM to:                   spam at mailsecurity.net.au
========================================================================


========================================================================
 iBurst Wireless Broadband from $34.95/month   www.platformnetworks.net
 Forward undetected SPAM to:                   spam at mailsecurity.net.au
========================================================================