[c-nsp] EoMPLS on PA-FE-TX

[Christopher E. Brown]

sthaug at nethelp.no wrote:
>>>As far as I remember we've had no problems running EoMPLS on PA-FE-TX
>>>on 7200 boxes using 12.0S and 12.2S, with the caveat that they don't
>>>support a full 1500 byte MTU for the Ethernet frame being encapsulated
>>>in MPLS.
>>
>>Is the MTU limitation also present on 7500 in 12.0S?  I'm getting 
>>reports from a customer that anything over 1494 is being discarded, but 
>>that could be an intermediate switch that I can't touch until tonight.
> 
> 
> It's been a while since I tried EoMPLS on 7500/PA-FE-TX, but as far as
> I can remember, this limitation is also present on 7500 in 12.0S.
> 
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


Isn't there an ip mpls-mtu setting that allows for this?

i.e.

 mpls label protocol ldp
 tag-switching mtu 1580
 tag-switching ip

-- 
------------------------------------------------------------------------
Christopher E. Brown   <chris.brown at acsalaska.net>   desk (907) 550-8393
                                                     cell (907) 632-8492
IP Engineer - ACS
------------------------------------------------------------------------