[c-nsp] Divide and FE in 2?

[David J. Hughes]

Skeeve, just use Dot1Q subinterfaces at both ends.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/ 
120newft/120t/120t1/8021q.htm


David
...


On 10/10/2005, at 7:51 PM, Skeeve Stevens wrote:

>
> Gidday all,
>
> Is it possible on a 7500 to another 7500 to divide the link in half  
> some
> how? VLAN's? Between 2 routers?
>
> Switches, easy, trunking, easy. but 2 routers? I'm not exactly sure  
> how it
> would work.. Any ideas?
>
> Reasoning is different rate limiting for each connection and different
> routing feeds.
>
>
> _______________________________________________________
> Skeeve Stevens, RHCE     Email: skeeve at skeeve.org
> Website: www.skeeve.org  - Telephone: (0414) 753 383
> Address: P.O Box 1035, Epping, NSW, 1710, Australia
>
> eIntellego - skeeve at eintellego.net - www.eintellego.net
> _______________________________________________________
> I'm a groove licked love child king of the verse
> Si vis pacem, para bellum
>
>
>
>
> ======================================================================= 
> =
>  iBurst Wireless Broadband from $34.95/month   www.platformnetworks.net
>  Forward undetected SPAM to:                   spam at mailsecurity.net.au
> ======================================================================= 
> =
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>