[c-nsp] 7600, Q-in-Q and VPLS

[Alexey Luckyanchikov]

On Wed, 19 Oct 2005, Saku Ytti wrote:

SY> > > I want to deploy such scheme:
SY> > > 1) Tunnel customer on Cat3550 into vlan X.
SY> > > 2) Transport vlan X via legacy L2 ethernet network to 7600.
SY> > > 3) Deliver vlan X to 7600 via trunk with legacy network, encapsulate
SY> > > packets into VPLS and send them via MPLS network to others locations,
SY> > > where is a same scheme with 7600 and legacy network.
SY> > 
SY> > Yes, with the right linecards.
SY> > 
SY> > > Is this possible? I can't find clear answer on Cisco site. If answer is
SY> > > "yes", can I use FlexWAN to connect PE (7600) and P routers in this
SY> > > scheme?
SY> > 
SY> > Dunno. I know the GE-WAN can do this. All cards can do EoMPLS with 
SY> > Sup720-3B(XL), so if you can live with point-to-point then you can do this 
SY> > quite price-efficiently.
SY> 
SY>  If you're shopping new and you have possiblity to wait, shop SIP-600,
SY> might be already available. Rather than 4GE OSM.

Are you sure? According to:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_configuration_guide_chapter09186a00801e5c06.html#wp1338235
core facing modules must be only OSM, not SPA.

-- 
Sincerely,
Alexey Luckyanchikov