[c-nsp] WS-G5486

[Vincent De Keyzer]

Thanks,

several people have mentioned the following page off-list:
http://tinyurl.com/nuzb

Re-reading it, I see that this GBIC supports MM fibre with a
"mode-conditioning cable". So this seems to be the right spec.

Now, just to make everything clear, what do LX and LH mean?

Vincent


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Marko Milivojevic
> Sent: mercredi 19 octobre 2005 13:07
> To: Vincent De Keyzer
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] WS-G5486
> 
> > I have a SM fibre between two floors of a building. Can I connect Gig0/3
> of
> > a 7206VXR/NPE-G1 to Gig0/1 of a 3524XL via this fibre, inserting a WS-
> G5486
> > in each of the two?
> 
> 	Yes, you can.
> 
> > If yes, what model should I order? The product reference seems to be
> > "WS-G5486" for both SM and MM fibre.
> 
> 	I don't have any multimode GBIC's close by, but for single-mode you
> are
> quite right about model number. You need LX/LH GBIC.
> 
> Marko.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/