[c-nsp] 2621 with cef

Horváth Szabolcs Szabolcs.Horvath at integris.hu
Thu Oct 27 09:43:12 EDT 2005


Hi,

Is it possible that 2621's max. throughput is around 60-65 mbps? 
I tried various version from 12.0 to 12.2. 

Pps is around 1.5-2k. Cpu is on 99%/98% (five seconds average).


Szabolcs Horvath

-----Original Message-----
From: Mikael Abrahamsson [mailto:swmike at swm.pp.se]
Sent: Thursday, October 27, 2005 3:28 PM
To: Horváth Szabolcs
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 2621 with cef

On Thu, 27 Oct 2005, Horváth Szabolcs wrote:

> Hi,
>
> I have an 2621 router with 2 FE interfaces.
> Nothing special, just route between the interfaces.
>
> I configured CEF as many cisco documentation suggest (ip cef in global 
> configuration mode, ip route-cache cef in interfaces), it seems to be 
> ok all settings, but CEF doesn't work: packets go through the route 
> cache, not the processor.
>
> Commands output is attached, if you have any idea why doesn't work CEF 
> please write me.

"ip route-cache cef" means that the packets being switched with cef is
counted in the "route cache" column, which has 99.9% of your packets in it.

It looks like your CEF is working.

-- 
Mikael Abrahamsson    email: swmike at swm.pp.se



More information about the cisco-nsp mailing list