[c-nsp] ARP table corrupted?

[Andrew Fort]

Ruben Montes wrote:
> Yes, the arp table is the same
> 
> -----Mensaje original-----
> De: Arturo Servin [mailto:aservin at remoteconfig.net] 
> Enviado el: miércoles, 31 de agosto de 2005 23:27
> Para: Ruben Montes
> CC: cisco-nsp at puck.nether.net
> Asunto: Re: [c-nsp] ARP table corrupted?
> 
> Ruben Montes wrote:
> 
> 
>>Hello,
>>
>>I'm suffering a weird problem.
>>
>>I'm trying to ping the ip address of two switches (c2950-12.1(22)EA1) that are conected in the same vlan that I am in and I get no response until I do a clear arp in the switches. Then I can ping them again, but if I wait some minutes I get the same problem and I have to clear the arp table. They are in the same vlan, so no L3 issues involved.
>>The diagram:

We've seen the same problem, maybe half a dozen times amongst ~300 
3550s, running any versions of software.

A bit tricky to open a case on, too :-)