[c-nsp] aux causes 7206 reload

[Sebastian]

Hi,


last few months I cope with the 7206VXR with NPE-G1/256MB RAM restarts.
I am doing tests which require me to reload the router very often.

What I see is  that for some reason, the router just after the reload
jupms into rommon.
It is not regular but happens very often.

I though that this was caused by CompatFlash (which was previously
formated on PC) and the router displayed the such warning during the boot
proccess. But formating the CF in Router did not solve the problem.

Additionaly I use AUX port on the router to log in to another router's
console:
 ip host aux 2005 192.168.10.10
and recently I have noticed that just after the 'aux' command the 7206
reloads.

I have captured two such cases, and I would liek to ask someone who is
familar with decoding such tracebacks for help.
<both cases are presented in aux_problem.txt file>

Maybe there is a common problem that touch the rommon and aux reset.

Thanks for any help

--------------------- 
Regards
Sebastian
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: aux_problem.txt
Url: https://puck.nether.net/pipermail/cisco-nsp/attachments/20050913/b9c4582a/aux_problem-0001.txt