[c-nsp] Limiting number of ARP entries for 802.1q subinterfaces

[oboehmer at cisco.com]

I'm not really sure if the previous suggestions address your issue. You
don't want to limit the number of mac-addresses learned over a given
switchport, but you want to limit the number of ARP entries resolved via
ARP on a routed/L3 interface.

I don't know of any (Rodney?), but which problem are you trying to
solve?

One obvious solution would be to use a smaller networks (a /24 on the
interface can have at most 253 ARP entries, so you have a natural limit)
;-) 

	oli


Murilo Antonio Pugliese <> wrote on Thursday, September 15, 2005 4:39
PM:

> Ok, so it's feasible to limit the amount of learned MAC addresses
> on L3 802.1q subinterface of a 7600 Series Router.
> 
> And so, are you guys confident that this functionality cannot be
> achieve at a 7500 Series Router ?
> 
> 
> -----Mensagem original-----
> De: Rubens Kuhl Jr. [mailto:rubensk at gmail.com]
> Enviada em: quinta-feira, 15 de setembro de 2005 11:08
> Para: Marko Milivojevic
> Cc: cisco-nsp at puck.nether.net
> Assunto: Re: [c-nsp] Limiting number of ARP entries for 802.1q
> subinterfaces
> 
> 
> I would add
> switchport port-security violation restrict
> 
> 'shutdown' action is probably unwanted.
> 
> Also of notice is a possible bug with IPv6 router discovery MACs that
> somehow got into port-security static MAC table. Disabling IPv6
> provided a workaround.
> 
> 
> Rubens
> 
> On 9/15/05, Marko Milivojevic <markom at pangalactic.net> wrote:
>> 
>>         It may not work in your environment (definitely won't work
>> for 7500), but 7600 is essentially a switch. Being that, it allows
>> you to do: 
>> 
>> int fa0/1
>>   switchport
>>   switchport trunk encapsulation do1q
>>   switchport mode trunk
>>   switchport trunk allowed vlan 200
>>   switchport port-security
>>   ! this is from the head -- check syntax
>>   switchport port-security maximum 50 vlan 200
>> !
>> interface vlan200
>>   ip address ...
>> !
>> 
>>         The configuration above will effectively limit the number of
>> learnet MAC addresses in VLAN 200 on interface Fa0/1, while still
>> providing L3 "termination". 
>> 
>> Marko.
>> 
>> Everton da Silva Marques wrote:
>>> Is there an option to limit the maximum
>>> number of MAC addresses that a 7500/7600
>>> router is willing to learn for one L3
>>> 802.1q subinterface? Something like:
>>> 
>>> interface FastEthernet0/1.200
>>>  encapsulation dot1q 200
>>>  ip arp cache maximum-mac-addresses 50
>>> 
>>> Otherwise, would anyone suggest another
>>> way to create a similar, per-VLAN limit
>>> for ARP entries?
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/