[c-nsp] Switchport link-state loss behaviour

[Kevin Graham]

On 9/21/05, Bruce Pinsky <bep at whack.org> wrote:

> What about "errdisable flap-setting cause link-flap"?
>
> http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/comref/i1.htm#wp1351916

I was going to suggest this, but 3750 comref didn't show an equivalent
for controlling flap-values. Checking on a 3550, you can show
flap-values but apparenly not set them. Is there a different
incanation?

#sh ver | inc IOS
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version
12.2(25)SEB, RELEASE SOFTWARE (fc1)
#sh errdisable flap-values
ErrDisable Reason    Flaps    Time (sec)
-----------------    ------   ----------
pagp-flap              3       30
dtp-flap               3       30
link-flap              5       10

(config)#errdisable ?
  detect    Error disable detection
  recovery  Error disable recovery