[c-nsp] RADIUS Framed-Route attribute not being picked up by a 2610.

[oboehmer at cisco.com]

Stephen Fulton <> wrote on Thursday, September 22, 2005 9:51 PM:

> Hi all,
> 
> I'm trying to configure an old 2610 (IOS v12.0(17)) to use the
> Framed-Route attribute it receives via RADIUS.  Authentication works
> fine, but the route does not seem to be picked up by the 2610.  I'm
> certain that the information by the RADIUS server is sound, as I've
> tested it against another NAS successfully, but here is the record
> I've been using:

> 
> Again, I'm able to authenticate properly and access the network
> afterwads, but here's the revelant AAA section in case I missed
> something: 
> 
>    aaa new-model
>    aaa authentication login default line
>    aaa authentication ppp default radius
>    aaa accounting network default start-stop radius

try adding "aaa authorization network default radius". applying routes
is part of network authorization, so you need to enable it to use
Radius..

	oli