[c-nsp] PA-2FE-TX using both ports kills module

[Jerry Kersey]

On my 7206VXR I could run either port. I could not run both at the same
time. See Bug CSCsb60945
The router would reload at random..

We got around this problem using 2 PA-FE-TX cards.

Hope this helps.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of FreeLSD
Sent: Monday, September 26, 2005 1:20 PM
To: Gert Doering
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] PA-2FE-TX using both ports kills module


On Mon, Sep 26, 2005 at 08:34:49AM +0200, Gert Doering wrote:
> On Mon, Sep 26, 2005 at 10:22:28AM +1200, Nikolai Schupbach wrote:
> > >Does it work if you run port 1 as "single port"?  Or only "port 0"?
> > It works fine if I use either port, as long as I don't use both ports 
> > simultaneously.
> 
> Interesting.  This is not exactly the same problem we've been observing,
> but then, I've only done limited testing in the 7200s - mainly 7500/VIP2.


I've done testing JAE* cards behaviour for 7206VXR (2 NPE-400) and 
7500 (VIP4-80, VIP2-40) 

-- in 7200 card do fail if you run both port simultaneously.
-- in 7500 card work right for port 0 and do fail with port 1.

so we talk about the same cards :)


summary of "broken" cards

fingerprint:
  PA-2FE-TX 
  HW rev 1.00 
  Board revision B0
  Serial number: JAExxxxxxxx 

5 cards tested by 3 people (2 - /me, 2 - Gert, 1 - Nikolai)
in 7 (or more) different 7500/7200 routers 
with different version IOS (12.0*S, 12.2*S)

any vote from cisco? ;)


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/