[c-nsp] Catalyst 4500 - Sup V - 12.2(18)EW SNMP traps
lists at hojmark.org
lists at hojmark.org
Tue Sep 27 16:30:54 EDT 2005
> Does anybody know if the following SNMP trap types are
> supported on the Catalyst 4500 running 12.2(18)EW on a Sup V?
>
> snmp-server enable traps entity
> snmp-server enable traps rf
> snmp-server enable traps fru-ctrl
Well, apparently they all are for 12.2(25)EWA3 on a SupIV.
<snip>
Switch(config)#do sh ver | inc IOS
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I5K91S-M),
Version 12.2(25)EWA3, RELEASE SOFTWARE (fc1)
Switch(config)#snmp-server enable traps ?
bgp Enable BGP traps
bridge Enable SNMP STP Bridge MIB traps
config Enable SNMP config traps
copy-config Enable SNMP config-copy traps
* cpu Allow cpu related traps
entity Enable SNMP entity traps
envmon Enable SNMP environmental monitor traps
flash Enable SNMP FLASH notifications
fru-ctrl Enable SNMP entity FRU control traps
hsrp Enable SNMP HSRP traps
ipmulticast Enable SNMP ipmulticast traps
msdp Enable SNMP MSDP traps
* ospf Enable OSPF traps
pim Enable SNMP PIM traps
port-security Enable SNMP port security traps
* rf Enable all SNMP traps defined in CISCO-RF-MIB
rtr Enable SNMP Response Time Reporter traps
snmp Enable SNMP traps
storm-control Enable SNMP storm-control trap parameters
stpx Enable SNMP STPX MIB traps
syslog Enable SNMP syslog traps
tty Enable TCP connection traps
vlan-membership Enable SNMP VLAN membership traps
vlancreate Enable SNMP VLAN created traps
vlandelete Enable SNMP VLAN deleted traps
vtp Enable SNMP VTP traps
<cr>
</snip>
We have another SupIV box currently running 12.2(20)EWA, which
does not have "rf", so the same is probably true for (18)EW on
SupV. (The three lines marked with a "*" are new between (20)EWA
and (25)EWA3).
-A
More information about the cisco-nsp
mailing list