[c-nsp] vip troubles

[Rodney Dunn]

That's the ECC correction on the vip catching a single bit parity
error that it can fix wihtout reloading.

Try replacing the memory on the VIP.

Rodney

On Wed, Sep 28, 2005 at 12:00:58PM +0300, Maxim Tuliuk wrote:
> Hello
> I set up new vip module and tried to load it amount of traffic near 10-20MBits
> As result:
> Sep 28 11:50:23.434 EEST: %VIP4-50 RM5271-3-MSG: slot3 VIP-3-PROCMEM_ECC_SINGLEBIT_ERROR: Processor memory ECC single-bit exception addr = 40038000 data = EB0B0000
> Sep 28 11:50:23.446 EEST: %VIP4-50 RM5271-3-MSG: slot3
> where is a problem: bad module, bad memory, etc?
> -- 
> Maxim Tuliuk
> WWW: http://primats.org.ua/~mt/
> ICQ: 21134222
> 
> The bike is absolute freedom of moving
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/