[c-nsp] cat6k / error analysis

[Gert Doering]

Hi,

On Wed, Sep 28, 2005 at 10:13:48AM +0200, Gert Doering wrote:
> 2005 Sep 28 07:57:59 UTC +00:00 %SYS-3-PORT_IN_ERRORS:Port 5/1 detected 10796 input packet(s) contained errors in last 30 minutes
> 2005 Sep 28 07:57:59 UTC +00:00 %SYS-3-PORT_RX_BADCODE:Port 5/1 detected 146163 bad code errors in last 30 minutes
> 2005 Sep 28 07:57:59 UTC +00:00 %SYS-3-PORT_RUNTS:Port 5/1 detected 2905 runt(s) in last 30 minutes

Oh well.

We have gremlins in the machine room.  For some weird reason, the LC
cable to the 7301 wasn't really plugged in all the way - the "click" was
missing.

Now it is, and (wonderful world) the errors are gone...

I'm still a bit puzzzed about the specific meaning of the individual
error messages, though - like "%SYS-3-PORT_DOT3_ALIGNMENT_ERROR" vs.
"%SYS-3-PORT_ALIGNMENT_ERROR", both of which show up on another port,
and neither can be found on www.cisco.com...

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de