[c-nsp] HWIC-WAN 4/TX for 28xx series - each port routed?

Gert Doering gert at greenie.muc.de
Wed Sep 28 09:40:01 EDT 2005


On Wed, Sep 28, 2005 at 09:18:21AM -0400, Dave Temkin wrote:
> You can have multiple VLANs/SVI's and each port can be in a different
> VLAN, however, if you want individual routed ports more like a router, you
> need the Etherswitch NM.

That's exactly how the NM-16ESW behaves - you put each port (group) into 
a L2 VLAN, and the IP routing is done via "interface vlan xxx" (SVI).

USENET is *not* the non-clickable part of WWW!
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de

More information about the cisco-nsp mailing list