[c-nsp] Appletalk in C6500 sup720

[Voll, Scott]

I haven't had to bridge Appletalk since we upgraded to a sup 720 but
with the sup1a/msfc2 you had to have the enterprise IOS (not cheap) and
under each vlan configure:

Appletalk cable-range <range>
Appletalk zone <name>

And of course global command:

appletalk routing

Scott



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ruben Montes
Sent: Thursday, September 29, 2005 8:55 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Appletalk in C6500 sup720

Hello,

We are implementing vlans in a customer's existing network and we have
found that there are some machines running Appletalk. I need to bridge
this protocol because some Appletalk machines are in different vlans...
The backbone is composed of two cat6500 sup720 running 12.2SX

Any help would be appreciated,

Ruben


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/