[c-nsp] No 12.4T for 7500s

[Alex Rubenstein]

Well, we use 7500's doe this purpose today (as well as 7200's with 
NPE-400's). Remember, the latency on the 7200's during BGP scanner is a 
'to it' problem, not a 'through it' problem.

7500's with 12.0S are just fine.




On Fri, 30 Sep 2005, Pete Templin wrote:

> Hank Nussbacher wrote:
>> <http://www.cisco.com/en/US/customer/products/hw/routers/ps359/prod_bulletin0900aecd8032b2ee.html>
>
> OK, so what are folks planning to use for channelized T3 customer
> aggregation?  I'm leary of the 7200 series because of the
> non-distributed nature (full BGP will lead to latency every 60s while
> BGP scanner runs), 7500 now has some significant writing on the wall,
> 10k has had 50% of the chassis lineup EOLed already, and the GSR 6CT3
> cards appear to have limitations (<=35 channel groups per DS3 I believe,
> and all of the other Engine 0 limitations about ACLs and such).
>
> pt
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
Alex Rubenstein, AR97, K2AHR, alex at nac.net, latency, Al Reuben
Net Access Corporation, 800-NET-ME-36, http://www.nac.net