[c-nsp] hsrp

[Tony Li]

Looks beautiful to me.  ;-)

Tony
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of scobe
> Sent: Friday, March 31, 2006 9:22 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] hsrp
> 
> Hello, I am trying to implement HSRP on two fast ethernet 
> ports, each one 
> being on two individual 2948G-L3, running Version 12.0(25)W5(27b)
> 
> My question is,  as the interfaces in the following example 
> are configured 
> to the same subnet (but different IP), is it ok that EIGRP 
> populates the 
> network with that the same block on two different switches, 
> or will that 
> cause an overlap, or any other issues?
> 
> The configuration in the following will be on two fast 
> ethernet ports on two 
> indiviual 2948g-l3's
> 
> ***********************************
> hostname RouterA
> !
> interface ethernet 0
> ip address 1.0.0.1 255.0.0.0
> standby 1 ip 1.0.0.3
> standby 1 preempt
> standby 1 priority 110
> standby 1 authentication denmark
> standby 1 timers 5 15
> !
> interface ethernet 1
> ip address 3.0.0.1 255.0.0.0
> !
> router eigrp 1
> network 1.0.0.0
> network 3.0.0.0
> ***********************************
> hostname RouterB
> !
> interface ethernet 0
> ip address 1.0.0.2 255.0.0.0
> standby 1 ip 1.0.0.3
> standby 1 preempt
> standby 1 authentication denmark
> standby 1 timers 5 15
> !
> interface ethernet 1
> ip address 2.0.0.2 255.0.0.0
> !
> router eigrp 1
> network 1.0.0.0
> network 2.0.0.0
> 
> best,
> 
> *erik
> 
> ** "Where can I put the meter?" - J.P. Morgan to Nikola Tesla
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>