[c-nsp] E/MPLS enabled gear

[Gert Doering]

Hi,

On Wed, Apr 05, 2006 at 09:21:31AM +0000, Kristofer Sigurdsson wrote:
> > (Yes, you said that you can't use Sup32s - but there isn't anything else,
> > GSR is MUCH more expensive)
> 
> What about a simple switch, say a Cat2960, with 24 FE ports and two
> GigE uplinks?  You could plug that into a router, say, 7301, and use a
> VLAN trunk between.  Then you could do EoMPLS with dot1q subinterfaces
> on the router.

The 7301 is more expensive than a Sup32-3B...

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de