[c-nsp] Nat on router with 1 interface

[Tassos Chatzithomaoglou]

Are you trying to do what Cisco calls NAT on a stick?
http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_tech_note09186a0080094430.shtml

Tassos

salil chitre wrote on 8/4/2006 11:02 πμ:
> Hi All,
> 
> Need help configuring NAT on a router with only 1
> physical interface. I tried configuring a Loopback
> interface, assigned it a valid IP and tried
> overloading it. This is as mentioned on the cisco
> website. There are simply no translations when i check
> sh ip nat translations.
> 
> I have verified the access-list and the config and its
> correct. Is there any other method of accomplishing
> this.
> 
> Thanks in Advance
> Salil
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/