[c-nsp] PPPoe on HWIC-4ESW?

[Hank Nussbacher]

2800 running with 12.4(4)T1 with HWIC-4ESW module.  Can one define PPPoE
on a switchport interface?  Ie:

interface FastEthernet0/1/0
 pppoe enable
 pppoe-client dial-pool-number 2
 no routing dynamic
!
interface Dialer1
 bandwidth 5000
 ip address negotiated
 ip mtu 1492
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 dialer pool 2
 dialer-group 2
 no cdp enable
 ppp authentication pap callin
 ppp pap sent-username xxxx password 7 xxxxx

Thanks,
Hank